Filter
Top Products
8
Cleaning and servicing
d Warning!
Note: Do not use abrasive cleaning agents as these
will damage the surfaces.
1. Pull out the plug.
2. Remove the mixer from the motor block.
3. Wipe the motor block with a damp cloth and wipe
dry.
4. Disassemble the blender:
Detach the blender motor base from the blender
jug by rotating it in an counterĆclockwise direction.
Follow the wording on the underside of the blender
support.
5. Disassemble the blender support:
Carefully take the blade compartment out of the
blender support.
6. Carefully remove the sealing ring from the blade
compartment.
Blades are very sharp.