Bosch Appliances MUM 6610 UC Blender User Manual


 
11
clockwise while pushing down until it
stops.
4. Place the splash ring on the bowl,
making sure the tabs on the bowl fit
into the recesses in the splash ring,
and turn counterclockwise, see figure
5a. Then place the cover on the splash
ring so that the tabs on the splash ring
fit into the recesses in the bowl cover
and turn the cover counterclockwise to
fasten the bowl cover to the bowl. See
figure 5b.
The splash ring and cover should be in
place whenever the power unit is in
operation. The splash ring and cover
serve to prevent the escape of flour
dust at the beginning of the stirring and
kneading process, and also serves to
prevent accidental contact with the
moving dough hook.
Figure 5.
Placing into Operation w/Dough Hook
Make sure that the power unit is on a
smooth, clean, suitable work surface and
switched to the Off position, “O/Off.” Unwind
the electrical cord to the necessary length
and plug into a convenient outlet. The mixing
bowl with dough hook is now ready for
operation. See table 1 for examples
demonstrating the use of the dough hook
attachment. Sample recipes may also be
found in the recipe section, at the back of
this manual.
How to Use Twin Beating Whisks
All Bosch Universal Series Kitchen
Machines come with a twin beating whisk
assembly, see figure 4c.
The twin beating whisks and mixing bowl
are intended to be used for very light
substances, such as cream, egg whites,
sauces, batters and light pastry doughs
that are thin enough to pour.
The dough hook should be used for all
heavier substances such as cookie doughs,
yeast doughs, pastry doughs and other
heavy doughs. The dough hook should
always be used when adding nuts,
chocolate chips, dried fruits, hard butter or
other fats, hardened brown sugar, etc. to a
mixture.
Use of mixing bowl with twin beating whisks
Before beginning to attach this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable surface and
switched to off position, “O/Off,” and that
you have moved the motor drive cover.
1. Before using the mixing bowl and twin
beating whisk assembly for the first
time, it is recommended that the bowl,
anti-splash cover, filling funnel cap and
twin beating whisk assembly be
washed. All components of the mixing
bowl and the twin beating whisk
assembly are dishwasher safe, except
the whisk holder.
The whisks may be removed from the
whisk holder as shown in figure 7a, and
washed in the dishwasher along with
the mixing bowl and other components.
The whisk holder should be washed in
warm soapy water. After washing, rinse
well and dry the whisk holder before
reattaching the whisks as shown in
figure 7b.