Filter
Top Products
14
Removing Contents
Before beginning to remove the contents
from the mixing bowl, make sure that the
power unit has been turned to the Off
position, “O/Off.” Remove the cover and
splash ring by turning clockwise and lifting
off. Once the cover and splash ring have
been removed, the dough hook or the twin
beating whisks may be removed by turning
the hook or whisk assembly clockwise while
lifting.
The mixing bowl can be removed from the
power unit by turning the bowl clockwise
while lifting.
The contents may now be used as desired.
Care and Cleaning
of Bowl and Its Accessories
Except for the whisk holder and the dough
hook, the mixing bowl and its accessories
are dishwasher safe.
It is recommended that the whisk holder
and the dough hook be washed by hand in
warm soapy water, rinsed well and dried
after each use. The whisks can be removed
from the whisk holder by simply pulling them
off, see figure 7a.
Figure 7.
After washing, rinsing and drying, the
whisks may be placed back on the whisk
holder by reversing the action to remove
them, see figure 7b. Press them on until
they snap into place.
The power unit of the kitchen machine
should be cleaned using a clean, damp
cloth only. Never use coarse or caustic
cleaning products to clean this appliance.
Never immerse the power unit in water.
Blender with Unbreakable Plastic Jar
(MUZ 7 MX1)
WARNING
1. There is a risk of injury from sharp
blades when using the blender
attachment.
2. Keep hands and utensils out of the
blender jar while it is attached to the
power unit.
3. Blades are sharp. Handle carefully.
4. To avoid injury, never place blade
assembly on power unit without
blender jar properly attached.
5. Always operate the blender with the
cover in place. Always hold cover in
place while operating the blender to
prevent cover from coming loose.
6. The use of attachments, including
canning jars, not recommended by
the manufacturer, may cause a risk
of personal injury.
7. When blending hot and/or frothing
liquids, process a maximum of 18 fluid
ounces (0.5 litres) at a time.
Figure 8.
8a. Cover closure/funnel
8b. Cover
8c. Blender jar
8d. Gasket
8e. Blade/base assembly