Filter
Top Products
English 9
CAUTION:
To avoid possible injury or damage to the
appliance, ensure grates are installed exactly
per installation instructions and not backwards
or upside down.
Four-burner models: When placing center grate, make sure
the horizontal bar aligns with the horizontal, center bar of
the left and right grates. See figure, “Four-Burner Center
Grate Placement” below.
Five-burner models: When placing center grate, make sure
the long center prong is located at the back of the cooktop.
See figure, “Five-Burner, Center Grate Placement” below.
Control Knobs
The cooktop has one control knob for each burner. Push
down and turn to the left to light and set the desired heat
setting.
CAUTION:
Failure to operate knobs properly may result in
personal injury and damage to the appliance.
Standard Knobs
SGS models, which do not feature ExtraLow® operations,
have only standard metal burner controls and rubber
grommets.
ExtraLow® (XLO) Knobs
SGSX models have standard metal burner controls and
rubber grommets as well as two ExtraLow® burner controls
on the left front and center. See “ExtraLow Burner Control
Knob” below.
The standard burner controls have an infinite number of
heat settings. At the LO position of the ExtraLow knobs, a
detent or notch may be felt.
To operate: Select the appropriate control knob, push down
and turn counterclockwise to the desired flame size. Turn
OFF by turning the control knob clockwise to OFF.
Figure 7: Four-Burner Center Grate Placement
Figure 8: Five-Burner, Center Grate Placement
Align Horizontal
Bars
Long
Center
Prong
Figure 9: Standard Burner Control Knob
Figure 10: ExtraLow Burner Control Knob