Filter
Top Products
10
ASSEMBLINGYOUR BREVILLE DIE CAST CITRUSPRESS
Step 4.
Place the Juicing Cone onto the Drive Shaft
and press down lightly to lock the Cone
into position.
Step 5.
Insert the Fruit Dome onto the underside of the
Juicing Press Arm by aligning the tab on top of
the Fruit Dome with the hole in the Juicing Press
Arm. Hold onto the Juicing Press Arm and press
the Fruit Dome up and backwards until the
Dome locks into position.
Note: The Fruit Dome is keyed, and
can only be inserted in one way
(this will ensure that it does not
rotate through operation).
800CPXL_IB_V1.qxd:800CP Book 19/8/09 9:23 AM Page 10