Filter
Top Products
2
INTRODUCTION
Congratulations on the purchase of your Breville BRITA Aqua Fountain chiller.
In the unlikely event of experiencing any difficulties, call:
BRITA Customer Careline: 0844 7424800 for expert advice
(Monday - Friday 8.30am - 5.30pm. Local rates apply)
Also remember to REGISTER your chiller online or by the enclosed card
www.brita.co.uk
QUICK SET-UP GUIDE
1 Before use, make sure water tanks are thoroughly washed and that water is
flushed through the entire chiller system (the removable bottom plug will aid
this). See page 4 for full instructions.
2 For optimum taste and filtration speed, ensure your BRITA Maxtra cartridge is
properly prepared before insertion into the top water tank. See page 5 for full
instructions.
3 When positioning the Aqua Fountain ensure it has a minimum of 15cm clearance
for the ventillation slots at the back for efficient air circulation and maximum water
cooling performance. See page 4 for full instructions.
4 Use a jug to fill the tanks with cold water and take care not to spill down the tank
sides or fill beyond the MAX FILL LEVEL. Add the water until all tanks are full.
To prevent air locks in the internal chilled water tank, depress the dispense lever
until the water flows out. See page 6 for full instructions.
5 Keep your Aqua Fountain out of direct sunlight and away from any heat sources.
See page 6 for full instructions.
6 Cooling time will vary depending on your ambient and water temperature. See
page 6 for full instructions.
Detailed instructions are included but for a quick set up, follow these key tips: