Breville BBL910XL Blender User Manual


 
12 13
FOOD PREPARATION
& USAGE
QUANTITY FUNCTIONS TIME
Bread crumbs
Remove crusts. Cut
bread into 1 inch
(2½ cm) cubes. Use
in crumb coatings,
stuffings or in meatballs
and meat patties.
120g
(up to 3 slices)
CHOP speed
20 – 30
seconds
Mayonnaise
Mix the egg yolk,
mustard and vinegar
or lemon juice. Add
oil slowly through the
lid. Use for dressing.
Up to 4 egg
yolks and
2 cups of oil.
MIX speed 1 min 30 sec
Hard cheeses
(like Parmesan
and Pecorino)
Cut into 1½ inch
(3cm) cubes.
Use in creamy sauces,
pasta dishes.
130g
4½ ounces
CHOP speed
15-20
seconds
Cream
Whip cream to firm
peaks. Add sugar or
vanilla before blending,
if desired.
300 – 600ml
1¼ - 2½ cups
MILL speed 10 seconds
This blending chart should be used as a guide only.
Troubleshooting
Motor doesn’t start or
blade doesn’t rotate
Check the blender jug and lid are securely in place.
Check the ON | OFF button and selected function button is illuminated.
Check that the power plug is properly inserted into the power outlet.
Food is unevenly
chopped
This can happen when too much food is being blended at one time. Try a
smaller amount, and work in batches if necessary.
The ingredients may be too large. Try cutting into smaller pieces. For best
results, ingredients should be in pieces no larger than ¾inch (2cm).
Food is chopped too
fine or is watery
Try blending for shorter period of time. Use the PULSE | ICE CRUSH function
for better control.
Food sticks to
blade and jug
The mixture may be too thick. Try adding more liquid and/or using a slower
speed for blending.
Blender overloaded
This blender has a motor protection feature to protect against over heating
and/or over current use. When activated OVERLOAD PROTECTION will
flash on the LCD and the blender will be inoperable.
If activated, turn the blender off by pressing the ON | OFF button on the
control panel, and unplug the blender. Wait a few minutes then re-plug and
power ON the blender.
If OVERLOAD PROTECTION is still flashing, repeat and leave the
blender for at least 20-30 minutes. Once OVERLOAD PROTECTION has
disappeared from the screen the blender is ready to be used again.
We recommend blending in smaller batches, or cutting ingredients into
smaller pieces.