Filter
Top Products
11
ASSEMBLING
ASSEMBLING
your Breville Smart Grinder™
BEFORE FIRST USE
Before first use, remove and safely discard
all promotional labels and packing materials
attached to your Breville Smart Grinder™.
Wash the Grinds Container and Lid, Bean
Hopper and Lid and Portafilter Cradles
in warm soapy water, rinse and dry
thoroughly. Wipe exterior of grinder with a
soft damp cloth and dry thoroughly.
ASSEMBLING YOUR BREVILLE
SMART GRINDER™
Bean Hopper
Ensure the Locking Dial is in the
‘UNLOCK’ position ie. it should not rotate
counterclockwise. Align the tabs on the
Bean Hopper with the groves on the top of
the grinder and place into position. Turn
the Locking Dial clockwise to lock the Bean
Hopper into position. Place beans into
the Bean Hopper and cover with the Bean
Hopper Lid.
The Bean Hopper can be removed by
turning the Locking Dial counterclockwise
and lifting upwards. This locking system
allows you to remove and transfer the Bean
Hopper without having to remove the beans.
NOTE
If the Bean Hopper has not been locked
into position, ‘LOCK BEAN HOPPER’
will be displayed on the LCD screen
disabling the operation of the grinder
for safety.
BCG800XL_IB_A10.indd 10-11 25/06/10 2:04 PM