Filter
Top Products
Before first use, remove any packaging material,
promotional stickers and labels and wipe the cooking
plate with a damp cloth, then dry thoroughly.
Plug the Breville Crêpe Creations into a 230/240 Volt
power outlet and switch the power on at the power
outlet. To turn the Breville Crêpe Creations on, press
the On/Off switch to the ‘On’ position. The red ‘Power
On’ indicator light will illuminate to show that the
Breville Crêpe Creations cooking plate is heating.
Slide the temperature setting control to the desired
heat setting between 1 and 5.
The cooking plate will reach the selected
temperature in approximately 4 minutes and the
green ‘Ready’ indicator light will illuminate.
The green ‘Ready’ indicator light will cycle on
and off during use indicating the appliance is
maintaining the selected temperature.
Note
When cooking crêpes, preheat cooking plate on
temperature setting 2 then pour a small amount of
batter onto the centre of the cooking plate. Quickly
spread the batter in circular movements using the
batter spreader until desired diameter of the crêpe is
achieved. (Fig 1-4)
A selection of pancakes, pikelets and hotcakes
can also be made on the Breville Crêpe Creations
using recipe ideas on Pages 10 – 16.
Note
Using your Breville Crêpe Creations
6
Fig.1
Fig.2
Fig.3
Fig.4