Filter
Top Products
8
9
Step 7
Place the pulp container into position by tilting
the motor base slightly to the right. Insert the
pulp container under the juicer cover on the left
hand side ensuring it is supported by the juicer
cover and motor base.
7
To minimise cleaning, line the pulp container with
a plastic freezer bag to collect the pulp. Pulp can
be used in other dishes, or as a compost for the
garden or discarded (see page 18)
Step 8
Place the juicer jug under the juice spout on the
right hand side of the Juice Fountain
™
Plus. The
juice jug lid can be used to avoid any splatter.
Alternatively you can fit the juice nozzle over
the juice spout and place a glass underneath.
The juice nozzle with prevent any splatter and
ensuring mess free juicing.
Assembling your Breville Juice Fountain
™
Plus continued Assembling your Breville Juice Fountain
™
Plus continued
Step 3
Align the arrows at the base of the stainless
steel filter basket with the arrows on the motor
drive coupling and push down until it clicks into
place. Ensure the stainless steel filter basket is
fitted securely inside the filter bowl surround and
onto the motor base.
3
Step 4
Place the juicer cover over the filter bowl
surround, positioning the feed chute over the
stainless steel filter basket and lower into
position.
4
Step 5
Raise the safety locking arm up and locate into
the two grooves on either side of the juice cover.
5A
The safety locking arm should now be in a
vertical position and locked into place on top of
the juice cover.
5B
Step 6
Slide the food pusher down the food chute by
aligning the groove in the food pusher, with the
small protrusion on the inside of the top of the
feed tube.
6A
FOOD PUSHER
GROOVE
SMALL
PROTRUSION
INSIDE FEED
TUBE
Continue to slide the food pusher down on the
feed chute.
6B