Filter
Top Products
13
OPERATING YOUR BREVILLE PRODUCT
BEFORE FIRST USE
Remove and safely discard any packaging
material or promotional labels attached to
your kettle. It is recommended that before
first use to fill the kettle to the maximum
level with cold tap water, bring to the boil by
selecting the BOIL 212° button, then discard
the water. Your kettle will only operate when
positioned on the power base. The kettle will
automatically switch off when the water has
reached the selected temperature.
OPERATION OF YOUR KETTLE
1. To fill the kettle, remove the kettle from
the power base and open the lid by
pressing the lid release button. Fill with
the desired amount of water. Always
fill the kettle between the minimum
(500 MIN) and maximum (1800 MAX)
marks on the water window. Too little
water will result in the kettle switching
off before the water has boiled or
reached the selected temperature.
2. Ensure the lid is closed and locked
firmly into place. Position the kettle
securely onto the power base. Insert
the power plug into a 110/120V power
outlet. The START|CANCEL and 212°F
BOIL button surrounds will illuminate in
white for one minute. A beep will sound
for two seconds. The START|CANCEL
button surround will automatically
switch off after one minute if not
selected.
NOTE
This appliance is designed for boiling
or heating water only. Never use it to
heat or boil any other liquids or food
stuffs. Never insert tea or coffee into
the kettle.
3. Select the desired water temperature
by pressing one of the five variable
temperature buttons (175˚F, 185˚F, 195˚F,
200˚F, 212˚F). The selected button and
the START|CANCEL button surround
will illuminate in white.
NOTE
If a temperature button is not selected
and the START|CANCEL button is
pressed, the kettle will start heating
water to the default 212ºF or the last
selected temperature.
NOTE
The KEEP WARM function can
be selected before, during or on
completion of the water heating cycle
(refer page 10).
4. Press the START|CANCEL button and
the button surround will illuminate in
red and the kettle will start heating. Do
not remove the kettle from the power
base during operation. Ensure the kettle
has switched off after the water has
boiled or the selected temperature has
been reached before removing the kettle
from the power base.
5. When the kettle has heated the water
to the selected temperature, 3 beeps
will sound, the START|CANCEL button
surround illumination will switch off,
and the selected temperature button
surround will illuminate for 1 minute
before switching off.
BKE820XL_IB_G13.indd 13 16/08/13 4:34 PM