Breville BKE820XL Coffeemaker User Manual


 
14
OPERATING YOUR BREVILLE PRODUCT
6. If the KEEP WARM function has been
selected, the KEEP WARM button
surround will remain illuminated in
red, the selected temperature button
surround will remain illuminated in
white, and the kettle will continue to
cycle on and off for 20 minutes. If the
kettle is removed from the power base
during the KEEP WARM function the
kettle will automatically switch off.
7. If further heating of the kettle is not
required, unplug the power cord and
empty the water from the kettle. Replace
the kettle onto the power base and close
the lid.
NOTE
Through regular use over time, scale
build-up in the kettle can affect the
performance and the life of the kettle.
Lime and phosphate are common
forms of scale that can damage your
kettle.
Lime scale, a harmless mineral, comes
in the appearance of white-colored or
rusty looking build up on the inner
walls of the kettle.
Phosphate scale can’t be seen,
however, it can cause the water to
appear cloudy when heated.
To prevent scale from damaging
your kettle, ensure that the kettle is
de-scaled regularly – refer to Care and
Cleaning (Page 17). To avoid scale
build-up, empty the kettle after use
and do not allow water to stand in the
kettle overnight.
NOTE
The default temperature setting of the
kettle when switched on at the power
outlet is 212°F.
When the kettle is unplugged at the
power outlet and plugged back in, it
will automatically default to the 212°F
temperature setting.
When the kettle remains plugged
in at the power outlet and different
temperature settings have been
selected, the kettle will default to the
last selected temperature setting.
WARNING
Do not open the lid during and after
operation. This may result in hot or
boiling water splashing from the kettle.
Pour all the hot water from the kettle
before opening the lid to refill.
NOTE
This kettle must be used only with
the power base supplied. Use caution
when pouring water from your kettle,
as boiling / heated water and steam
will scald. Do not pour the water too
quickly.
NOTE
Always fill the kettle to between the
minimum (500 MIN) and maximum
(1800 MAX) marks on the water
window on the kettle. Too little water
will result in the kettle switching off.
Filling above the maximum mark
on the water window of the kettle
may result in boiling / heated water
splashing from the kettle.
BKE820XL_IB_G13.indd 14 16/08/13 4:34 PM