Filter
Top Products
14
PAge heAder
OPERATING YOUR BREVILLE PRODUCT
BEFORE FIRST USE
Remove and safely discard any packaging
material and labels before using the
microwave oven for the first time. Carefully
unpack the microwave oven and keep all the
packing material until all the parts of the
microwave oven have been found and the
appliance has been assembled.
To remove any dust that may have
accumulated during packing, wash the
roller ring and glass turntable tray in warm
soapy water, rinse in clean water then dry
thoroughly. Wipe the interior and exterior of
the microwave oven with a soft, damp cloth
then dry thoroughly.
ASSEMBLING THE GLASS
TURNTABLE AND TURNING ON THE
MICROWAVE OVEN
1. Place the roller ring into position in the
indented space in the oven cavity base.
2. Insert the glass turntable into position,
matching the indents (hub) on the base
of the glass turntable with the indents
in the shaft located in the centre of the
oven cavity base.
3. Plug the power cord into a 230V or
240V power outlet. Switch on at the
power outlet. The microwave oven is
now on.
INSTALLATION
1. Select a level surface that provide
enough open space for the intake and/or
outlet vents.
2. A minimum clearance of 3.0 inches
(7.5cm) is required between the oven
and any adjacent walls. One side must
be open.
• Leave a minimum clearance of 12 inches
(30cm) above the oven.
• Do not remove the legs from the bottom
of the oven.
3. Blocking the intake and/or outlet
openings can damage the oven.
4. Place the oven as far away from radios
and TV as possible.
5. Operation of microwave oven may
cause interference to your radio or
TV reception.
6. Plug your oven into a standard
household outlet. Be sure the
voltage and the frequency is the
same as the voltage and the
frequency on the rating label.
30cm
20cm
20cm
POWER
LEVEL
WEIGHT
DEFROST
1 2
4
3
7 8
0
9
5 6
REHEAT VEGE
MEAT
FISH
PIZZA SOUP OATS
PASTA POTATO
STOP
CLEAR
START
+
30 SEC
AUTO
COOK
TIME
DEFROST
SET
CLOCK