Filter
Top Products
18
OPERATING YOUR BREVILLE PRODUCT
TIME DEFROST
Example: To defrost piece of beef in
10 minutes:
1. Press TIME DEFROST, LED will
display dEF2.
2. Press 1, 0, 0, 0 to set defrost time.
3. Press START / +30 SEC to start
defrosting. Time will be displayed and
countdown will start.
AUTO COOK
To enable pre-programmed automatic
functions, press the “AUTO COOK”
button first and then select the
corresponding number pad for the
desired auto cook function.
To confirm the desired auto cook function,
corresponding number pad will need to be
pressed twice.
Example: To select Auto Cook Meat
function, input the following steps:
1. Press “AUTO COOK” button
2. Press corresponding number pad “4” to
display “A4”
3. Press number “4” again to confirm the
selection and default weight “150” will
be displayed.
4. Press number “4” until desired weight of
the food item is selected (150, 300, 450
and 600 g)
5. Press START / +30 SEC button to
commence operation.
TIPS ON DEFROSTING
• Before defrosting meat, remove the
freezer bag or wrap to prevent meat
sitting in ‘drip’, which will otherwise
boil as the meat defrosts causing meat
to go grey and begin to stew. To remove
frozen meat from freezer wrappings,
defrost for a few minutes so the wrap is
easy to remove.
• Remove meat from Styrofoam tray, as
they are not microwave safe.
• Place meat onto a rack with a drip tray
to catch juices. Alternatively, place onto
a microwave safe plate that is lined
with absorbent paper and elevate on an
upturned bowl or cup.
• Refer to your user manual for its
preferred setting and timing.
• Check the meat throughout the
defrosting time. As outer portions
of meat thaw, remove them from the
microwave. If the edges of meat feel
warm, stop microwaving and allow meat
to stand for a few minutes or until edges
are cold again.
• After defrosting the meat it must be
cooked right away. Don’t leave it to
stand for any length of time at room
temperature or in the fridge.
• The energy required for defrosting
is much less than for cooking, the
microwave causes the ice formed in the
food to melt rather than heat.
WEIGHT DEFROST
Example: Defrost beef of 500g:
1. Press WEIGHT DEFROST, LED will
display dEF1.
2. Press 5, 0, 0 in order, ‘g’ will light,
the range of defrosting weight is
100g–2000g.
3. Press START/+30 SEC to start
defrosting, ‘g’ will go out, time will be
displayed and countdown will start.