Filter
Top Products
16
USING THE VARIABLE POTATO
MASHING LEG
NOTE
If the variable masher leg is already
assembled start from step 3.
PUTTING TOGETHER THE POTATO
MASHER LEG
1. Align the tabs on the inner leg, with the
slots on the inside of the outer leg. Insert
the inner leg until it clicks.
2. Slide the outer leg onto the gear box,
matching the Align graphics of both
parts. Rotate the outer leg until it clicks
and locks into place.
ASSEMBLY & OPERATION
3. Align the mashing leg with the motor
body and push the two parts together
until it clicks.
TO USE THE POTATO MASHER LEG
For food preparation tips and recipes
refer to the recipes section. Ensure the
potato masher is completely and properly
assembled.
1. Place food to be mashed into a
sufficiently large mixing bowl or
container.
2. Insert the plug into a 230/240V power
outlet and turn the power on.
3. Select the desired setting on the variable
mashing leg.
4. Select a high speed on the speed
control dial.
5. Place the potato masher into food and
press the trigger switch to turn the
masher on.
6. Move the masher through the
ingredients with a gentle raising and
lowering action until desired texture
is achieved.
7. Switch off the motor by releasing the
trigger switch before lifting the masher
out of the bowl. Switch off at the power
outlet and remove the power plug.