Filter
Top Products
17
ASSEMBLY & OPERATION
TO DETACH THE POTATO
MASHING LEG
Ensure the trigger switch is released, the
power is turned off at power point and the
appliance is unplugged.
Hold the motor body with one hand, and,
using thumb and finger of the other hand,
press on the two EJECT buttons on either
side of the motor body. Pull the motor body
away from the masher to detach.
RECOMMENDATIONS WHEN USING
WITH THE POTATO MASHING LEG
• Release the trigger switch and ensure
the masher has completely stopped
turning before removing the masher
from the food during operation.
• Place the mixing bowl on a damp cloth
during mashing. This will keep the
mixing bowl stable.
USING AS A WHISK
Remove blending leg from motor body
(follow the instructions “To detach the
blending leg”).
1. Align the whisk gear box to the hole in
the underside of the motor body and
push the whisk in until it clicks and
locks into place.
TO USE THE WHISK
For food preparation tips and recipes refer
to the recipes section. Ensure the whisk is
completely and properly assembled.
1. Place food to be processed into a
blending jug or a sufficiently large
mixing bowl or container.
2. Insert the plug into a 230/240V power
outlet and turn the power on.
3. Select a speed between 1–15 on the
speed control dial.
4. Place the whisk into food and press the
trigger switch to turn the whisk on.
5. Move the whisk through the ingredients
with a gentle raising and lowering action
until desired texture is achieved.
6. Switch off the motor by releasing the
trigger switch before lifting the whisk
out of the bowl. Switch off at the power
outlet and remove the power plug.