18 19
NOTESTROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
LED indicator flashing
& alternating between
WHITE & BLUE
• Water Chiller is in Auto
Protection Mode
Fan externally obstructed
or an error with the internal
electronics.
Unplug the unit & wait a
few minutes to reset the
unit.
If problem persists call
Breville Customer Service
1300 139 798
Water does not flow
during initial flushing
• Air lock in internal
tubing
With the chilling chamber
full, move slider to the
middle position and
use the plug like a sink
plunger while holding the
dispensing paddle open to
clear the air lock.
Flow rate of water slow • Not enough water in
water tank
Ensure the water level is
always above the MIN level
for optimum flow rate.
Water tank has small
dark particles
• Brita filter cartridge
& unit have not been
flushed
Immerse the filter cartridge
in cold water and agitate to
remove air bubbles.
Flush the unit twice before
each new cartridge.
How can I clean the
chilling chamber
Remove the plastic plug in
the filter tank to clean the
chilling chamber.
There is a flashing arrow
& no bars appearing on
the Brita Memo indicator
• The Brita Filter
cartridge may need
to be replaced
Brita Filter Cartridge
should be replaced every
8 weeks.
What does the Brita Filter
cartridge remove from
the water?
The Brita Filter reduces
chlorine, metals such as
lead, copper, & limescale.
Leaves in flouride.
Where can I purchase the
Brita Filter cartridges
Brita filter cartidges are
available at all leading
retailers or contact Brita
Consumer Service
Ph: 1300 557 762