Filter
Top Products
5
ASSEMBLING YOUR BREVILLE VEGETABLE
AND CITRUS DUO
Before first use :
Wash all removable parts in hot, soapy
water. Rinse and dry thoroughly. It is
recommended NOT to wash any parts of
the Vegetable and Citrus Duo in the
dishwasher as the harsh detergents and
high water temperature will discolour and
distort these parts.
DO NOT IMMERSE THE
MOTOR BASE, PLUG OR
CORD IN WATER OR ANY
OTHER LIQUID.
Step 1. Place motor base and pulp
container into position
Place the motor base on a dry, level surface.
Place the pulp container on top of the drive
shaft.
Step 2. Place filter basket into position
Sit the Stainless Steel Filter Basket into the
pulp container, over the drive shaft coupling.
Push down on filter basket firmly to ensure it
is seated and locked onto the drive shaft.
(see figure 2)
Step 3. Lock the juicer cover into place
Place the juicer cover on top of the pulp
container and secure it by raising and
clicking the two safety locking arms on the
sides of the juicer into position. If the safety
locking arms are not locked into position, a
built-in safety device will prevent the
Vegetable and Citrus Duo from operating.
(see figure 3).
Step 4. Position the juice jug
Place the jug directly underneath the juice
outlet on the right hand side of the motor
base.
Step 5. Use the food pusher to move
vegetables down the food chute
Assembling as a Vegetable
Juice Extractor
4
KNOW YOUR BREVILLE VEGETABLE AND
CITRUS DUO
1. Food pusher for guiding pieces of
vegetables and fruit down the feed chute
2. Feed chute
3. Juicer lid
4. Stainless Steel Micro Mesh Filter
Basket
5. Citrus extractor cone
6. Citrus extractor cone cover
7. Large pulp container
8. Safety locking arms
lock the
assembled unit in place - the juicer will
not operate without the arms locked into
position.
9. Transparent juice jug
10. On/off switch
11. Motor base
12. Juice outlet
Figure 2
Figure 1
Figure 3
1.
2.
3.
3.
5.
6.
7.
10.
11.
12.
➞
➞
Lock