Filter
Top Products
HL
00
2
0
- 3 -
Backsplash
(RMP Series)
Model 418
10” Rd
adjustable elbow
Model 412
transition
(3 1/4” x 10” to 7”)
Adapter and damper
3 1/4’’ x 10’’
(supplied with P5 and P8 blowers)
Adapter and damper
3 1/4’’ x 14’’
(supplied with P8 blower)
Standard
3 1/4” x 10” duct
Standard
3 1/4” x 14” duct
Model P5
single-blower
(500 cfm)
64000 SERIES HOOD
64000 SERIES
RANGE HOOD
SYSTEM
Model 331H (600 cfm)
or 332H (900 cfm)
exterior blower
Model 335 (1200 cfm)
or 336 (1500 cfm)
exterior blower
Flow deviator
(vertical exhaust only)
(supplied with
P5 and P8 blowers)
Model 647
(7” Rd wall cap)
Model 634 or 644
(roof cap)
Model 634 or 644
(roof cap)
Model 643
(8” Rd wall cap)
Model 421
(10” Rd. vert.
in-line damper)
8” Rd
standard
duct
Model 407
(7” Rd x
24’’ section)
Model 413
transition
(3 1/4” x 10” to 8”)
Model 459 transition
(3 1/4” x 14” to 8”)
Model 410
(10” Rd duct - 2ft. sections)
Model 332 KR exterior
blower rough-in kit
Model P8 dual-blower (900 cfm)
for use with 36’’ hoods or wider
NOTE: The dual blower P8 can be
installed either with 3 1/4’’ x 14’’
or 3 1/4’’ x 10’’ ducts.
For optimal air and quiet sound
performance,use 3 1/4’’x 14’’ducts.
Rough-in kit
(supplied with P5 and P8 blowers)