Filter
Top Products
- 4 -
1. INSTALL DUCTWORK
Plan where and how the ductwork will be installed.
Install proper-sized ductwork, elbows and roof or
wall cap for the type of blower you are installing. If
using 7” or 8” round ducts, or 3 1/4’’ x 14’’ duct, use
a transition. Use 2” duct tape to seal duct joints.
Hood with
interior blower
3 1/4" x 10" or
3 1/4" x 14" duct
Roof cap
Wall
cap
HH0029A
3 1/4" x 14" to 8''
transition if
3 1/4" x 14" duct
Hood with
interior blower
7" or 8" round duct
Roof cap
Wall
cap
3 1/4" x 10"
to 7" or 8" transition
HH0015A
2. MEASURE INSTALLATION
Dimensions for the most common installations are
shown below.
We recommend you to install the hood at a
minimum of 20” from an electric range and
24” from a gas range.
For optimal performance, the hood should not be
installed more than 30” from cooktop.
Hood
Cabinets
30" maximum
clearance
Standard 36" h.
cook top
Backsplash
HH0003A
(Optional)
Hood
Cabinets
20" minimum
clearance
(24" for gas)
Standard 36" h.
cook top
Backsplash
HH0004A
(Optional)
STANDARD INSTALLATION
INSTALLATION WITH 7” OR 8” ROUND DUCT
Hood with
exterior blower
10" round duct
External blower
HH0016A
External
blower
INSTALLATION WITH EXTERIOR BLOWER