Filter
Top Products
Baffle Filters
Baffle filters are available as an option. To order them, refer to the table below to
find the right filter kit number for your hood. To install them, refer to instruction
sheet included with baffle filter kit.
KIT #
RBF6030
RBF6036
RBF6042
RBF6048
RBF6054
RBF6060
RBF6066
RBF6072
HOOD WIDTH
30”
36”
42”
48”
54”
60”
66”
72”
HD0011
BAFFLE FILTER (TYPICAL)
- 10 -
CAUTION
Remove protective plastic film covering filters before installing them.
It is recommended to install side filters first and finish with center one(s).
1. Insert upper end of filter into the hood (finger sized cup side).
2. Raise lower end toward the inside of hood.
3. Position rear part of filter into channel and pull.
4. Using finger sized cup, pull on the upper end of filter and slide it under the
front inner retaining piece.
Replacement filters are available from your dealer. See label inside hood for size
and part number.
2
1
3
4
HD0024
12. INSTALL FILTERS
HD0065