Filter
Top Products
2. MEASURE INSTALLATION
Dimensions for the most common installations are shown below.
Adjust your measurements for various heights of ceilings, soffits, cabinets or
cooktops. For proper operation, the hood must be a minimum of 24" and a
maximum of 30" above the cooktop.
18"
(457 mm)
Standard 18"
(457 mm) H
over-cooktop
cabinet
24"
(610 mm)
Cooktop
19"
(483 mm)
Top of wood
mounting strip
Hood
RMP Series
Backsplash
(optional)
Standard
8 ft. (2.44 m)
ceiling
Standard 36"
(914 mm)
H cooktop
HH0028A
3. PREPARE THE INSTALLATION
Remove the installation kit from inside the hood.
Make sure that the following items are included:
-Wood strip
-Installation manual
-Accessories including:
.Filters (Quantity varies depending on range hood width)
.Bag of parts including:
Screws
#10-2" flat head (4),Screws #8-3/4" (8), Nuts #10-32 (4)
Wall anchors (2), Washers 3/16" ID X 3/4" OD (2)
1
2
3
4
HR0002
Using a Phillips #2 or a
Robertson #2 screwdriver,
unscrew the hood from the
bottom of crate. Refer to figure
beside to locate all 4 screws.
Discard these screws and
remove hood from wood pallet.
- 6 -
INSTALLATION WITH STANDARD 18’’ HIGH
OVER-COOKTOP CABINET
INSTALLATION WITH 12’’ SOFFIT OR
OPTIONAL SOFFIT CHIMNEY RMN SERIES
Maximum distance
between the hood and
the cooktop
Minimum distance
between the hood and
the cooktop