Filter
Top Products
Page 12 B101278-2-1008
6. Remove ignitor from the control panel by unscrewing
the ignitor button and nut. Attach ignitor wires to termi-
nals on the ignitor. See Figure 7.
7. Re-attach the ignitor to the control panel , then tighten
nut and insert AA battery, positive side down, and re
-
place ignitor button. See Figure 8.
8. Install foam grip (4) on lid handle (3). See Figure 9.
Tip: For ease of installation, slightly lubricate the lid
handle with liquid soap before pushing the foam grip
into place.
Figure 8
Figure 9
GRILL ASSEMBLY
Figure 7
R3B
R3
Figure 6