Lift-Off Oven Door
(on some models)
FIG. 18
LIFT OFF DOOR
To remove oven door/s:
• Open door fully.
• Rotate the “hinge retainers” into
the locked position, as shown over
the hook located on the bottom side
of each hinge quadrant.
• Lift the door slightly, to clear
“hinge slots”, and pull straight out
to clear hinge mechanism from
main front opening.
To replace oven door/s:
• Insert hinges into front frame
opening locating “hinge slots” on
front frame as shown.
• Rotate “hinge retainers” back into
the “open” position.
• Rotate door to make sure it
functions properly.
TO CLEAN THE DOOR:
Inside of door:
• Soap and water will normally do
the job.
Heavy spattering or spillovers may
require cleaning with a mild
abrasive cleaner. Soapy, wet metal
pads may also be used. Do not
allow food spills with a high sugar
or acid content (such as milk,
tomatoes, sauerkraut, fruit juices or
pie filling) to remain on the surface.
They may cause a dull spot even
after cleaning.
• If necessary, you may use an
oven cleaner.
Follow package directions:
Outside of door:
• Use soap and water to thoroughly
clean the top, sides and front of the
oven. Rinse well.
• Spillage of marinades, fruit juices,
tomato sauces and basting materials
containing acids may cause
discoloration and should be wiped
up immediately. When surface is
cool, clean and rinse.
• Do not use oven cleaners, cleansing
powders or harsh abrasives on the
outside of the door.
16
HINGE
SLOT
HINGE RETAINER
“LOCKED”
REMOVAL
ACTION
HINGE RETAINER
“OPEN”
QUANDRANT
HOOK
HINGE
MECHANISM
