Filter
Top Products
Page 7
You can set this to "DOUBLE" if you experience certain types of pods that do
not reliably eject on single.
NUMBER OF EJECTS
SINGLE DOUBLE
Number of pulses per ounce calculated during flow calibration.
FOR REFERENCE ONLY. DO NOT MANUALLY ADJUST!
FLOW COUNTS / 10 oz
(-) 640 (+)
CALIBRATE FLOW
Measure and enter the actual flow rate coming out of the sprayhead.
CALIBRATE FLOW ?
NO YES
PROGRAM FUNCTIONS
HOT H2o READY
Sets the minimum temperature allowable to start dispensing hot water.
ENTER ASSET #
This function allows the you to enter in an optional asset number. This can be
useful for tracking the usage or service of an individual machine within a group.
SET PULSE BREW (LARGE)
Individually adjust on/off times.
AIR TIME (LARGE) (1-25)
Time the pod is purged at the end of each brew cycle.
SET PULSE BREW (SMALL)
Individually adjust on/off times.
AIR TIME (SMALL) (1-25)
Time the pod is purged at the end of each brew cycle. Can be disabled if brewer
is set up to dispose pods under counter.
BREWS TO EMPTY (OFF/15-25)
Set number of used pods in bin to turn on "EMPTY BIN" message.
ENABLE ENERGY SAVER
Choose to have the tank heaters turn off, or reduce the tank temp to (140° F)
or (60° C) once the "SET IDLE TIME" has expired. .5-50.0 hrs.
BREW COUNTS
Retains the total number of brew cycles completed. There is one reset-able
counter, and one life counter that is not reset-able.
AIR TIME A: 20
(-) DONE (+)
SetPulseBrew A ?
NO DONE YES
ENTER ASSET # ?
NO YES
H2O READY: 190°
(-) DONE (+)
AIR TIME B: 20
(-) DONE (+)
SetPulseBrew B ?
NO DONE YES
BREWS TO EMPTY
(-) 25 (+)
Enabl EnergySavr
NO DONE YES
BREW COUNT ##
NO YES
CONTINUED
41170.1 050312
Use this counter to check/reset the seal replacement message.
BREWS ON THIS SEAL
RESET NEXT ##