Filter
Top Products
Page 16
Amount of press out time during primary rinse mode.
DEFAULT: 60
Range: OFF/ 1-60
2nd RINSE AIR ON
60 Secs
Primary rinse mode. "OFF" is equal to push & hold. Num-
bers represent seconds it will continue to rinse when
button is released.
DEFAULT: 2.0
Range: OFF/ 1-4.0
2nd RINSE TIME
2.0 Secs
11.
12.
Total brew counter (Can not be reset)
Brew counter (Can be reset)
BrewCount 1500
BrewCount 1500
RESET
NEXT
NEXT
Adjust force of "PRESS OUT"
DEFAULT: 7
Range: OFF/1-7
RINSE AIR POWER
- +- - - - - - - 7
- +
- +
13.
14.
15.
16.
Press "YES" if you would like to program a phone number
for a factory authorized service department that will be
displayed if the brewer should encounter a fault code.
ENTER SERVICE #
NO YES
_
Use the UP/DOWN buttons to scroll through numeric digit
for that position. Use the button to move curser to the
next digit to the right. Press the to move curser to the
left. Once you are finished programming the number, scroll
all the way to the right to advance to next screen.
42822.1 072810
A
ADVANCED ADJUSTMENTS & OPTIONAL SETTINGS