Filter
Top Products
Page 21
SERVICE (cont.)
TANK HEATER (Cont.)
P1168.71
FIG. 13 TANK HEATER TERMINALS
10478 061500
13. Secure sprayhead tube to hood using a hex nut.
14. Install sprayhead.
15. Reconnect the wires to the limit thermostat, tank
heater and control thermostat. See limit thermo-
stat and control thermostat sections in this manual
when reconnecting wires.
16. Install fill basin, secure with tank inlet fitting and
gasket. Insert water supply line through grommet
in fill basin.
17. Refer to Fig.13 when reconnecting the tank heater
wires.
WHI to Terminal Block
(White Insert on 230V
Two Wire Models)
RED to Terminal Block
(Red Insert on 120/240V
Three Wire Models or
200V and 240V Two
Wire Models
BLK to Control Ther-
mostat (Brewers W/Out
Faucet)
Thermal Cut-Off to BLK
from Control Thermo-
stat (Brewers W/Fau-
cet)