Bunn G9-2 Coffee Grinder User Manual


 
7
URN
O
F
F
S
T
A
R
T
ON
CARAFE
P1300
Batch Selector Switch (Optional)
URN - Switching to this position allows the correct amount of beans to be dispensed when grinding a large batch.
CARAFE - Switching to this position allows the correct amount of beans to be dispensed when grinding a small
batch.
Model G9
Off/On/Start Switch
OFF - (left position)
Placing the switch in this position stops the operation of the grinder.
ON - (center, resting position)
The switch will return to this position after a grind cycle has begun and will remain in this
position after grinding has ceased.
START - (right, momentary position)
Placing the switch in this position initiates a timed grind cycle.
OPERATING CONTROLS (Continued)
Models G1, G2, G3 & G2 trifecta
Off/On/Start Switch
OFF - (upper position)
Switching to this position stops the operation of the grinder.
ON - (center, resting position)
The switch will return to this position after a grind cycle has begun and will remain in this position after grinding has ceased.
START - (lower, momentary position)
Pressing the switch initiates grinding only when a bag is in place behind the chute.
Grind Selector
Allows the user to vary the grind for each bag of coffee. Each setting will provide precisely the same grind every time it is
selected.
Bag Sensor
Prevents the grinder from operating unless the back of a bag is in place behind the dispense chute.
Do not attempt to bypass this safety device.
P1028
P1029
Models LPG, LPG-2E
Off/On/Start Switch (Models LPG and LPG-2E)
OFF - (upper position) Switching to this position stops all operation of the grinder.
ON - (middle position) The switch will return to this position after a grind cycle has begun
and will remain in this position after grinding has ceased.
START - (lower, momentary position) Pressing the switch to this position and releasing initi-
ates a grind cycle.
Hopper Selector Switch (Model LPG-2E only)
LEFT - Switching to this position allows beans to be ground from the left hopper.
RIGHT - Switching to this position allows beans to be ground from the right hopper.
41545 111711