Filter
Top Products
Page 4
#03408.0000
#03409.0000
#00656.0000
This equipment must be installed to comply
with the International Plumbing Code of the
International Code Council and the Food
Code Manual of the Food and Drug Adminis-
tration (FDA). For models installed outside
the U.S.A., comply with the applicable
Plumbing /Sanitation Code.
#00986.0000
USER NOTICES
Carefully read and follow all notices in this manual and on the equipment. All labels on the equipment should be
kept in good condition. Replace any unreadable or damaged labels.
WARNING
• DO NOT OVERLOAD CIRCUIT.
• ALWAYS ELECTRICALLY GROUND
THE CHASSIS.
• DO NOT DEFORM PLUG OR CORD.
• FOLLOW NATIONAL AND LOCAL
ELECTRICAL CODES.
• KEEP COMBUSTIBLES AWAY.
FAILURE TO COMPLY RISKS EQUIPMENT
DAMAGE, FIRE OR SHOCK HAZARD.
READ THE ENTIRE
OPERATING MANUAL BEFORE
USING THIS PRODUCT
00986.0000F 10/07 ©1994 Bunn-O-Matic Corporation
#37881.0000
PN: 00658.0000G 02/08 © 1985 BUNN-O-MATIC CORPORATION
#00658.0000
To reduce the risk of electric shock,
do not remove or open cover.
No user-serviceable parts inside.
Authorized service personnel only.
Disconnect power before servicing.
Risk of Fire. Use a UL listed grounding
type attachment plug, rated 125/250
Vac, 30 A, 1 phase, 4 conductor. Plug
to be selected and installed only by
qualified service personnel.
38125.0000A 04/05 © 2005 Bunn-O-Matic Corporation
#38125.0000
Risk of Fire. Use a UL listed grounding
type attachment plug, rated 125/208
Vac, 30 A, 1 phase, 4 conductor. Plug
to be selected and installed only by
qualified service personnel.
38125.0001A 04/05 © 2005 Bunn-O-Matic Corporation
#38125.0001
41581 120408
#00985.0000
FOR USE ONLY ON AN
INDIVIDUAL BRANCH
CIRCUIT RATED 20 AMPS
• FILL WATER TANK
BEFORE ENERGIZING
• DO NOT OVERLOAD
CIRCUIT
• KEEP AWAY FROM
COMBUSTIBLES
• DO NOT DEFORM
PLUG OR CORD
• FAILURE TO COMPLY
RISKS EQUIPMENT
DAMAGE, FIRE OR
SHOCK
• BREWER ENERGIZED
UNLESS UNPLUGGED
SEE
INSTRUCTIONS
WARNING
#06064.0000
#34056.0001
120/208V
120/240V
120V
For 120/208V or 120/240 volt operation,
replace Power Supply Cord only with
Bunn-O-Matic part number 01699.0000.
! CAUTION
#34072.0000
#29710.0011
Optional Field Wiring
120/208-240 V, 13.8-16.8 A, 2900-4050 W
1PH, 3-Wire + GND, 60HZ
39175.0000A 05/06 ©2006 Bunn-O-Matic Corporation
Incorrect programming could result in accidental dispens-
ing of HOT LIQUID.
Trained personnel are to follow instructions provided for
software programming.
Use of additional graphic layer requires disabling of
appropriate switches.
Read all instructions for additional graphic layer prior to
installing and programming.
! WARNING
#39175.0000