Bunn JDF-4S Beverage Dispenser User Manual


 
8
OPERATING CONTROLS
FIG 7 Refrigeration Switch
FIG 9 Product Dispense Switches - JDF-2S
Refrigeration Switch
The refrigeration switch is located on the Electrical Panel of the dispenser near the Circuit Board. This switch
controls power to the water bath pump and relay contacts for the compressor and condenser fan motor.
Product Dispense Switch (Mechanical Switch Machines)
Pressing and holding switch will initiate product flow from the respective nozzle; releasing the switch will stop
the flow.
FIG 10 Product Dispense Switches - JDF-4S
44744.2 110813