Filter
Top Products
12
PROGRAMMING THE DISPENSER
Open the dispenser door to access the digital programming module with LED display.
Two basic modes are available to the operator: Display Mode and Program Mode.
To enter the Display Mode, Set the RUN/NIGHT/PROGRAM Switch to the RUN position.
To enter the Program Mode, Set the RUN/NIGHT/PROGRAM Switch to the PROGRAM position.
Display Mode: Used to view the current set-up values. Use the MENU switch to scroll to the next display.
NOTE: The display blanks out after two minutes of inactivity. Press any button to activate the display.
LCD DISPLAY DISPLAY MODE DESCRIPTION
Home View DisplaysTank Temperature.
MENU (-) (+)
1 8 0
Tank Temperature Displays target Tank Temperature (F°)
MENU (-) (+)
0 1 1 8 0
Regular Dispense Ratio Displays Left Dispense Ratio (XXX:1)
MENU (-) (+)
0 2 3 8
Decaf Dispense Ratio Displays Right Dispense Ratio (XXX:1)
MENU (-) (+)
0 3 3 8
Cup Dispense Volume Displays Cup Dispense Volume (XX.X
Oz.). Set to 0.0 for “Push and Hold”
Dispense Mode.
MENU (-) (+)
0 4 0.0
Carafe Dispense Volume Displays Carafe Dispense Volume
(XX.X Oz.)
MENU (-) (+)
0 5 0.0
38791 031606