Filter
Top Products
Page 6
TROUBLESHOOTING (cont.)
PROBLEM
Inconsistent beverage level
in dispenser
Spitting or excessive steam-
ing
Dripping from sprayhead
PROBABLE CAUSE
REMEDY
1. Syphon System
2. Lime Build-up
CAUTION - Tank and tank
components should be delimed
regularly depending on local
water conditions. Excessive
mineral build-up on stainless
steel surfaces can initiate corro-
sive reactions resulting in
serious leaks.
1. Lime Build-up
CAUTION - Tank and tank
components should be delimed
regularly depending on local
water conditions. Excessive
mineral build-up on stainless
steel surfaces can initiate corro-
sive reactions resulting in
serious leaks.
2. Control Thermostat
1. Syphon System
2. Lime Build-up
CAUTION - Tank and tank
components should be
delimed regularly depending
on local water conditions.
Excessive mineral build-up
on stainless steel surfaces
can initiate corrosive reac-
tions resulting in serious
leaks.
The brewer must be level or
slightly lower in front to syphon
properly.
Inspect the tank assembly for
excessive lime deposits. Delime
as required.
Inspect tank assembly for
excessive lime deposits. Delime
as required.
Refer to
Service
- Control Ther-
mostat for testing procedures.
See page 8.
The brewer must be level or
slightly lower in front to syphon
properly.
Inspect the tank assembly
for excessive lime deposits.
Delime as required.