Filter
Top Products
5. ATTACH THE CORD – Align the magnetic plug end with the 3
electrical pins on the back of the control unit. The plug has a ledge on
it which must be facing down. Angle the plug so the ledge is in first,
then push in rest of plug. Plug the other end of the cord into a suitable
2-prong 120-volt electrical outlet. Always make sure fryer and cord are
out of reach of children.
IMPORTANT
The magnetic cord was designed to detach easily from the fryer. As a result,
if it is bumped or touched during use it could possibly detach, causing the
unit to stop heating. Avoid contact with cord during operation. If contact
occurs, verify that the cord is still properly connected. Unit will need to
be reprogrammed.
Setting the Controls
Step 1: POWER ON
Once the power cord is plugged in, the logo on the display
panel illuminates. Press the power button and the LCD panel
illuminates with the default settings of 325˚F and 00 time. The
deep fryer chimes to indicate it is ready for operation.
Step 2: SELECT THE TEMPERATURE
Initially, a default temperature of 325˚ flashes on the
display panel. To select another temperature, press the
Temp Select button. The temperature will change
by 25˚ increments from a maximum of 375˚
to a minimum of 175˚. To rapidly cycle through
the temperature options, press and hold the Temp
Select button.
8