Cannon C110DPX Cooktop User Manual


 
19
Electronic Clock & Automatic Cooking Feature
(b) To set the 1st oven to switch ON and OFF automatically:
This allows you to cook for a specified duration and additionally choose the time you wish the cooking
cycle to finish. From this information the system works out when the cooking cycle will need to start and
automatically switches the oven on at the required time.
- Follow STEPS 1 to 5 in the previous section (a) entitled: “To set the 1st oven to switch ON immediately and
OFF automatically”, then continue as below:
STEP 6. Press the Time/Mode button, until the “end time” symbol is flashing. The display will
show a default cooking end time (this will be the current time plus the cooking duration you
set in STEP 5). The “end time” symbol will flash.
STEP 7. Turn the +/- control knob to set the time you wish the cooking to end. After a few
seconds the display the temperature, cooking duration and end time in turn.
THE COOKING DURATION AND END TIME IS NOW SET.
The display will show the temperature and cooking duration when the programme has
started.
At the end of the cooking duration, “End” and the “cooking duration” symbol will show in the
display and an audible tone will be heard for a few seconds.
Turn the 1st oven control to “O”, the OFF position to switch the oven off. The display will revert
back to the time of day.
To cancel the automatic mode at any time turn the 1st oven control to “O”, the OFF position.
Note: At any time up to the start of cooking, the cooking end time, cooking duration and
the temperature will be shown in the display.