Cannon C50GCK Cooktop User Manual


 
7
check that the burner does not turn off when you turn the knob from Max to Min and and when you open
and close the oven door quickly.
Adapting the gas grill to different types of gas
Replacing the nozzle of the grill burner:
Remove the enamelled baffle at the front of the grill (2 screws).
Remove the screw on the right hand side of the burner and gently slide the burner off the injector.
Using a 7mm socket, replace the grill injector as appropriate (see table 1).
Re-assemble the burner and baffle.
Important
On completion of the operation, replace the old rating sticker with one indicating the new type of gas used.
This sticker is available from our Service Centres.
Note
Should the pressure of the gas used be different (or vary) from the recommended pressure, it is necessary to
fit a suitable pressure regulator onto the inlet pipe in compliance with current National Regulations relative to
“regulators for channelled gas”.