Filter
Top Products
12
GB
Release the button, and within 4 seconds, the current
time will reappear with the
symbol and "auto."
3. Press the
button, and then use the - and +
buttons to set the end cooking time. Let us
suppose that it is 13:00
4. Release the button and the display will show the
current time within 4 seconds:
When "auto" is lighted, it indicates that the length
and end Cancelling a Preset Cooking Time
Press the
button, and use the - button to set the
time to:
Then press the manual cooking mode button .
Timer Feature
The timer can be used to count down from a given
length of time. This feature does not control when the
oven comes on or turns off, but, rather, it only emits
an acoustic signal when the preset time has run out.
Press the
button, and the display will read:
Then use the - and + buttons to set the desired time.
Release the button, and the timer will start at that
second. The display will show the current time.
At the end of the preset time, an acoustic signal will
sound, which can be turned off by pressing any
button (except the - and + buttons), and the
symbol will turn off.
Changing and Cancelling Settings
• The settings can be changed at any time by
pressing the corresponding button and using the -
or + button.
• When the length setting for the cooking time is
cancelled, the end cooking time setting is also
cancelled, and vice versa.
• When in automatic cooking mode, the appliance
will not accept end cooking times prior to the start
cooking time proposed by the appliance itself.
TIMER (ELECTRIC OVEN)
The programmer makes it possible to preset the
oven and the grill in terms of:
• delay start with a preset length of time for
cooking;
• immediate start with a preset length of time for
cooking;
• timer.
Button functions:
: Timer with hour and minutes;
: Length of cooking time;
: End cooking time;
: Manual change;
- : Change time (backwards);
+ : Change time (forwards).
How to Reset the Digital Clock
After the appliance has been connected to the power
source or following a power outage, the clock display
will begin to blink and read: 0:00
• Press the
buttons at the same time. Then
use (within 4 seconds) the - and + buttons to set
the exact time.
Use the + button to move the time forwards.
Use the - button to move the time backwards.
The time can also be changed in the following two
ways:
1. Repeat all of the foregoing steps.
2. Press the
button, and then use the - and +
buttons to reset the time.
Manual Operation Mode for the Oven
After the time has been set, the programmer is
automatically set to manual mode.
Note: Press the
button to return the oven to
manual mode after every "Automatic" cooking
session.
Delayed Start Time with Preset Cooking Length
The length and the end cooking times must be set.
Let us suppose that the display shows 10:00.
1. Turn the oven control knob to the cooking setting
and temperature desired (example: convection
oven at 200°C).
2. Press the
and the use (within 4 seconds) the -
and + buttons to set the length of the cooking
time. Let us suppose that 30 minutes was set for
the length of the cooking time. In this case, the
display will show: