Filter
Top Products
19
Using The Oven Manually
Turn the oven ON as indicated in the “TURNING THE OVEN ON AND OFF” chapter.
Operate the oven manually by selecting the oven function and temperature as indicated in the “SELECTING
THE COOKING FUNCTIONS” and “SELECTING THE TEMPERATURE” chapters. The oven will start to
operate about four seconds after your last selection.
If “A” symbol is shown on the clock/programmer display (semi-automatic or automatic cooking
selected), then you need to cancel the preset automatic cooking as indicated in the “CANCELLING A SET
PROGRAMME” chapter.
Turn OFF the oven as indicated in the “TURNING THE OVEN ON AND OFF” chapter.
Cancelling a Set Programme
To cancel a set programme (“A” symbol activated on the programmer display):
– Select “
dur
” on the programmer display by touching the key “ ” and then touch “ ” or “ ” key.
You should read “
000
'” on the clock/programmer display.
– A set programme is also cancelled when the oven is switched OFF in the “stand-by” mode. At the next
power up the oven is not programmed.
IMPORTANT: If the oven is ON, remember to switch it off manually otherwise it does not stop
operating in the set mode.