10
Installation
9. Assemble the ventilation duct(H), as shown in the
diagrams below dependant on whether you are
extracting air to the outside (Fig 10) or re-circulating
(Fig 11), in which case you will need to use the supplied
T-piece (M). Ensure that the duct adapter (F) is securely
connected to the duct pipe or T-piece in order to
minimise noise.
10. Fit the vent adapter(F) to the body of the motor as
shown in Fig 11 using 2 screws (E)
11. Mount the upper chimney section onto the frame
section and secure in position using the 2 screws (A) as in
Fig 12.
Fig. 10
Fig. 11
Fig. 12