CDA HCC662 Cooktop User Manual


 
Using your hob
To switch the zone on
Touch the power key.
Select the zone required by touching the zone selection key until the required zone flashes a 0 in the zone display.
The order for zone selection is clockwise starting at the front right zone.
The zone display will flash for approximately ten seconds when the zone will be set at the power level selected or
switch off if no power level is set.
Please note:
To activate a zone, touch the zone selection key until the required zone display flashes. When no display is
flashing, the only control key that is active is the power on/off key.
To set the power level without Boost function
Touch the – key to set the zone power level at 4, and then increase or reduce the power level using the + and –
keys until the required level is set.
To set the power level with Boost function
The hob is equipped with a Boost function which will set the zone to its maximum power for a specific period of time,
and then the zone will return to normal functioning.
Touch the + key to set the zone power level at 9 and then touch - to reduce the power level to the level
required. The display will flash alternately an A and the power level. After ten seconds, the zone will be set at
the power level selected and the display will show an A.
To check on the power level selected, touch either the + or – key.
Please note:
To switch off the boost function, it is necessary to reset the zone by completely switching it off and on again.
As 9 is the maximum power level, there is no boost function available at power level 9.
The Extended zone
Once the zone is switched on, touch the + and – keys simultaneously to switch on the extended zone. A • (dot)
will show on the zone display to confirm the extended zone is on.
The extended zone switches off automatically when the zone is switched off.
To switch a zone off
Select the zone required by touching the zone selection key until the required zone flashes a 0 in the
zone display.
Touch the + and – keys simultaneously for approximately three seconds.
To switch the hob off
Touch the power on/off key for approximately three seconds.
Child lock
The hob is equipped with a childlock to prevent accidental use. The child lock only operates when the hob is not in use.
To set the child lock
Touch the power key.
Then touch the zone selection key and the - key simultaneously.
When the hob beeps, touch the + key. The zone displays will show an L to confirm the child lock is set.
To switch off the childlock
Touch the power key.
Then touch the zone selection key and the - key simultaneously.
When the hob beeps, touch the - key.
4