Filter
Top Products
Please note:
• When the zone display shows PC, the zone will switch off automatically after five seconds if the power level is not set.
• The precook time is preset according to the power level selected.
• The precook function can only be used for cooking at power levels 6-12.
• If you have set the direct power key to a power level below six, touching that key when setting the precook function will
set the power level at 6.
The timer
• The timer allows you to preset the length of time any of the zones will be on, between a minimum of one minute and a
maximum of ninety-nine minutes. The timer can be used on each zone separately.
To set the timer
• First switch on the zone and set the power level.
• Touch either the
or keys until the timer display shows the required duration.
• To go straight to the maximum 99 minutes, touch the
key once when the timer is switched on.
Please note:
• The timer will only count down when the cookware is on the zone.
• The timer will count down in minutes, and then in seconds for the last minute.
• At the end of the set time, the zone will switch off, the timer will flash 0 and the hob will beep for approximately 20
seconds. To switch off the alert, touch any key for that zone.
To change the timer once set
• Touch the
or keys until the timer display shows the required duration.
To cancel the timer once set
• Touch the
or keys simultaneously or reduce the time required using the key until the zone
display shows 0.
Please note:
If you cancel the timer, the zone will continue at the set power level until it is switched off as described above.
Tempo function
The hob is equipped with a Tempo function which allows you to see how long the zone has been on and also allows you to
set the timer for the remaining time you need it to cook – perfect if you are interrupted when cooking.
To see how long the zone has been on since the power level was set
Touch the
key at any time during cooking. The timer display will flash the number of minutes the zone has been on the
current power level for five seconds.
To set the remaining cooking time
Touch the
key at any time during cooking. Whilst the timer display is flashing, touch the key to set the total cooking
time required. The timer display will show the required time for three seconds and beep to confirm the function is set, then
the remaining cooking time is displayed.
Please note:
Once the cooking time is set, you cannot change it for five seconds after touching the
key. After the timer
display has stopped flashing, the cooking time can be changed.
The Tempo function shows the total time elapsed since the last power level was set. If you change the power
level, the time elapsed is reset.