CDA HVN 32 Cooktop User Manual


 
10
OR
Afterheat in Cooking Zone/s
When switching off a cooking zone (power level 0 ), if
the temperature of the zone is too warm to be touched
the display will show alternately "
H " and " 0 ".
Whenever the touch control is switched off, the residual
heat is shown by a static " H ".
Avoid touching the hob surface over the cooking area.
Please pay special attention to children.
It is still possible to start cooking again; just set the
required power level.
"
H " is turned OFF when the cooking zone temperature
drops below a preset temperature.
Cooking zone
power level
Front zone
Watt power
Rear zone
Watt power
1
75 W 100 W
2
150 W 200 W
3
300 W 300 W
4
400 W 500 W
5
500 W 700 W
6
600 W 900 W
7
800 W 1100 W
8
1000 W 1600 W
9
1400 W 2200 W
Power Ignition and Adjustment of a Cooking Zone
To turn ON a cooking zone the touch control must be
switched ON (see section “
How To Turn the Touch Control
ON and OFF
”).
Press the key
and keep it pressed until the desired power
level, ranging between 1 and 9 is set.
As an alternative, press the key . The choice starts from
level 9 (maximum level) down to 1 (minimum level).
To reset the power level press the key and keep it pressed
until power level zero ( 0 ) or alternatively press the keys
and at the same time.