CDA RV 1001 Range User Manual


 
32
Over Doors - Cleaning The Panes Of Glass
The oven doors have two panes. To clean these, you need to
remove the inner pane.
Removing the Inner Pane
– Open the door to the full extent (fig. 26a).
– Attach the swivel retainers of the rh and lh hinges onto the
metal bar above them (fig. 26b).
– Gently pull out the inner pane of glass (Fig. 27a).
– Clean the glass with an appropriate cleaner.
– Dry thoroughly, and place the pane on a soft surface.
– Now you can also clean the inside of the outer glass.
Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the panes of glass since they can scratch the
surface, which may result in shattering of the glass.
Reassembling the Inner Pane
– Check the correct positioning of the no.4 (four) silicon rubbers
D (fig. 27b).
– Check that you are holding the pane the correct way. You should
be able to read the wording on it as it faces you.
– Insert the inner pane in the left E and right F side guides (fig.
27c) and gently let it slide up to the retainers H (fig. 27d).
– Unlock the oven door by opening it completely and detaching
the swivel retainers of the lh and rh hinges from the metal bar
above them (fig. 26a).
Fig. 27c
Fig. 27b
E
F
H
Fig. 27d
H
D
E
F
Fig. 27a
It is normal the opened gap between the
top edge of the inner glass and the top
of the door. This allows the cooling air
circulation.