Filter
Top Products
17
“Touch-Control” Keys
The “touch-control” keys shall be operated by the fingers (just by touching the key). When using touch
controls it is best to use the ball of your finger rather than the tip.
The keys are automatically deactivated:
– 8 seconds after the last selection; the deactivation is indicated by an acoustic signal (“beep”).
To reactivate just touch the “ ” key or the “ ” and “ ” keys.
Setting the Clock
When first connected, or after a power failure, the digits and “AUTO” will shown on the display. To set the
clock, touch the “ ” key, for more than 2 seconds, and then the “ ” or “ ” keys.
Important: The oven does not operate, in manual cooking, without first having set the clock.
To set the clock, with the appliance already connected, touch the “ ” and “ ” keys simultaneously (for
more than 2 seconds), then “ ” or “ ” keys.
Important: - changing the time will delete any automatic program;
– after setting the clock, the oven starts to operate in the selected function (manual cooking).
The “ ” symbol is steady illuminated.
Using the Timer
You can use the timer at any time, even when the oven is not in use. The timer does not turn the oven
off.
The timer can be set for up to 23 hours and 59 minutes.
– To set the timer, touch the “ ” key for more than 2 seconds (the “ ” symbol flashes), than the “
” or “ ” keys.
– After about 8 seconds an acoustic signal (“beep”) will sound confirming the regulation (“ ” symbol
steady illuminated).
– To check the remaining time touch the “ ” key for more than 2 seconds. If the remaining time is
more than a minute the display will show hours and minutes; if less than a minute the display will show
seconds.
– When the time is up, the timer will beep. Touch the “ ” key , for more then 2 seconds, to turn it
off; or press the “ ” or “ ” key to stop the beep and than the “ ” key, for more than 2 seconds,
to deactivate the “ ” symbol flashing on the display.
– Turn off the oven manually (function and thermostat knobs in the off position) if the manual cooking
has been completed.
Setting the Timer Volume
You can select from three volume levels.
– Touch the “ ” and “ ” keys simultaneously for more than 2 seconds.
– Touch the “ ” key; you can read on the display the current timer volume (“ton1”, “ton2” or
“ton3”).
– Touch the “ ” key to listen or change the timer volume.
– Timer volume activated: the last displayed.
– After about 8 seconds an acoustic signal (“beep”) will sound confirming the volume setting; then the
time of day will be displayed.