CDA SV150 Oven User Manual


 
30
Telescopic Sliding Shelf Supports
The telescopic sliding shelf supports make it safer and easier to insert and
remove the oven shelves and trays. They stop when they are pulled out to the
maximum position.
Important! When fitting the sliding shelf supports, make sure that you fit:
– The slides to the top wire of a rack. They do not fit on the lower wire.
– The slides so that they run out towards the oven door.
– Both sides of each pair of shelf slides.
– Both sides on the same level.
To fix the sliding shelf support onto the side racks:
– Screw the side rack onto the oven wall (Fig. 21).
– Fit the sliding shelf support onto the top wire of a rack and press (Fig. 21). You will hear a click as the
safety locks clip over the wire.
Left
Right
Fig. 21
Model:
6Q5..