Filter
Top Products
Dishwasher Baskets
The upper basket has two different heights available, to allow for larger
products in either the upper or lower basket. To raise or lower the upper
basket:
1. Take hold of the basket handles, as shown in fig. 8.
2. Raise the basket up as high as possible, then lower it down until it stops.
The images below are designed as guidance as to best practice for loading the
dishwasher.
Dishwasher Baskets
To adjust the height of the upper basket:
1. Open the basket retaining clips, as shown in gure 7, but turning them to
the side.
2. Remove the upper basket, and relocate the alternate set of wheels on the
runner, as shown in figure 8, pushing the basket back into place.
3. Close the basket retaining clips.
The images below are designed as guidance as to best practice for loading
the dishwasher.
g 7
fig 8
Upper basket
Lower basket
Bad loads
Alternative basket loads
Lower Basket
Top basket
Faulty loads
18
Alternative basket loads
Lower Basket
Top basket
Faulty loads
18
Lower basket
21
Top basket height adjustment while it is full
Basket height adjustment mechanism on the top basket of
your machine is designed to let you adjust the height of your
top basket upwards or downwards, without removing it from
your machine when it is full, and create large spaces at the top
or bottom area of your machine as needed. Basket of your
machine is set to upper position in factory settings.
In order to raise your basket, hold it from both sides and pull it
upwards. In order to lower it, hold it from both sides again, and
leave it.
In loaded basket adjustment mechanism, make sure that both sides are in the same position (up
or down).
21
Top basket height adjustment while it is full
Basket height adjustment mechanism on the top basket of
your machine is designed to let you adjust the height of your
top basket upwards or downwards, without removing it from
your machine when it is full, and create large spaces at the top
or bottom area of your machine as needed. Basket of your
machine is set to upper position in factory settings.
In order to raise your basket, hold it from both sides and pull it
upwards. In order to lower it, hold it from both sides again, and
leave it.
In loaded basket adjustment mechanism, make sure that both sides are in the same position (up
or down).
21
Top basket height adjustment while it is full
Basket height adjustment mechanism on the top basket of
your machine is designed to let you adjust the height of your
top basket upwards or downwards, without removing it from
your machine when it is full, and create large spaces at the top
or bottom area of your machine as needed. Basket of your
machine is set to upper position in factory settings.
In order to raise your basket, hold it from both sides and pull it
upwards. In order to lower it, hold it from both sides again, and
leave it.
In loaded basket adjustment mechanism, make sure that both sides are in the same position (up
or down).
fig. 8
9
Upper basket Lower basket