CDA WC370 Dishwasher User Manual


 
The plastic housing on the water inlet pipe contains an electrically operated valve. The wires that connect to this valve
are inside the inlet hose. Do not cut through the inlet hose, and do not put the plastic housing in water.
Children could get locked inside the appliance. Therefore when disposing of an old appliance, cut off the plug and set
aside, and damage the door lock so that the door can no longer be closed.
Recommendations
To reduce energy and water consumption, remove all dirt residues from the dishes prior to loading the dishwasher.
Only run the dishwasher when fully loaded.
Place hollow items (bowls, glasses and pans) face down in the basket.
Do not put dishes or cutlery with tobacco ash, wax, lubricating grease or paint residues in the dishwasher.
Before First Use
Set the water softener level as required by the water hardness in the area.
Add 2kg of salt into the salt compartment and then fill with water to the top of the salt compartment.
Remove all the packaging materials from the interior of the dishwasher.
Fill the rinse aid compartment.
Run a hot programme without any dishes in the dishwasher.
2