Filter
Top Products
Control Panel
Power button (1)
• To switch the dishwasher on or off, press the power button (1). When you switch on the dishwasher, the end of
programme light will illuminate, and two dashes will appear on the display.
Programme display (2)
The programme display shows the selected programme and the remaining time to run. If there is a fault on the
dishwasher, the fault code will show on the display.
Programme selection button (3)
• To select a programme, press the programme selection button (3). The dishwasher will store in its memory the last
programme used.
Delay timer button (4)
The dishwasher is equipped with a variable timer of up to 19 hours’ duration at hourly intervals.
• To set the delay timer, press the delay timer button (4). This will switch the timer on for one hour.
• To change the delay duration, press the delay timer button again until the required delay duration is shown on the
display, alternating with the selected programme and the programme duration.
• To cancel the delay timer, press the delay timer button again until 0h shows on the display.
3 in 1 function button (5)
The dishwasher is equipped with a tablet function that automatically adjusts the amount of rinse aid and dishwasher
salt used during a programme.
• To use this function, press the button after selecting the programme, before you close the door.
Prewash button (6)
The dishwasher is equipped with a prewash function that automatically adds a prewash to the selected programme.
The prewash function improves the wash performance of the programme, but also can change the temperature and
duration of the programme.
• To use this function, press the button after selecting the programme, before you close the door.
The prewash is also an independent programme (8) which can be used to rinse the contents of the dishwasher, for
example if the dishwasher is not yet full and a complete programme is not yet required.
• To do so, select the programme as described below.
Half-load button (7) and indicator lights
The dishwasher is equipped with a half-load function that allows for either the upper or lower basket to be washed
independently, or for both baskets to be washed if they contain only a small number of dishes.
• To use this function, press the half-load button (7) until the indicator light shows next to the required section of the
dishwasher, either upper, lower or both lights if both baskets are to be washed together.
Salt and rinse aid warning lights (8)
When the dishwasher salt or rinse aid begins to run out, the warning light will illuminate
to advise that it needs refilling.
End of programme light (8)
When the programme is complete, the dishwasher will emit five beeps and the end of
programme indicator light will illuminate.
1 2 3 4 5 6 7 8
3