Filter
Top Products
ASSEMBLY
STEP 1
First choose a suitable location to assemble your Multi-Purpose Cooker. We recommend that you
assemble the unit on a piece of carpet or other non-abrasive surface to prevent scratching the
appliance.
To begin - place the Burner Assembly upside down in the work area. Insert the Leg Assemblies
over the tabs on the Burner Assembly as shown below. Be sure the angle of the Leg Assemblies
face outward as shown. Be sure that the tabs of the Windshield are fully inserted into the Leg
Assemblies. Secure each Leg Assembly with one Wing Screw. Tighten securely.
Leg Assembly (X 3)
Burner Assembly
(Shown upside down)
Wing Screw (X 3)
Windshield Tab
(insert into Leg)
Page 13