Filter
Top Products
WARNING
CALIFORNIA PROPOSITION 65
1. Combustible by-products produced when using
this product contains chemicals known to the State
of California to cause cancer, birth defects, or
other reproductive harm.
2. This product contains chemicals, including lead
and lead compounds, known to the State of
California to cause cancer, birth defects or
other reproductive harm.
Wash your hands after handling this product.
Installation Safety Precautions
• Use your appliance, as purchased, only with LP (propane) gas
and the regulator/valve assembly supplied.
• The appliance installation must conform with local codes, or in
their absence of local codes, with the National Fuel Gas Code,
ANSI Z223.1/ NFPA 54 and Storage and Handling of Liquefied
Petroleum Gases, ANSI/NFPA 58.
• This appliance is safety certified for use in the United States.
Do not modify for use in any other location. Modification will
result in a safety hazard.
• This appliance shall be used only outdoors and shall not be
used in a building, garage or any other enclosed area.
Page 4
CAUTION
For residential use only. This appliance is not
intended for commercial use.
WARNING
Do not attempt to repair or alter the
hose/valve/regulator for any “assumed” defect. Any
modification to this assembly will void your warranty
and create the risk of a gas leak and fire. Use only
authorized replacement parts supplied by
manufacturer.
CAUTION
This appliance is NOT for frying turkeys.
Do not use any cooking vessel other than the one
provided with this unit or size specified..
Storing Your Appliance
• Clean cooking pan.
• Store in dry location.
• When LP cylinder is connected to appliance, store outdoors in
a well-ventilated space and out of reach of children.
• If the regulator is disconnected from the LP cylinder, a hook is
provided to hang the regulator from the appliance, as shown
below.
• Store indoors ONLY if LP cylinder is turned off and is
disconnected, removed from appliance and stored outdoors.
• When removing appliance from storage, follow “Cleaning the
Burner Assembly” instructions before starting.