Filter
Top Products
SKUs
40764, 93752,
For technical questions, please call 1-800-444-3353. Page 3
& 91905
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
Observe work area conditions1. . Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of ammable gases or liquids.
Keep children away2. . Children must never be allowed in the work area. Do not let them
handle machines, tools, or extension cords.
Do not force tool3. . It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool capac-
ity.
Use the right tool for the job4. . Do not attempt to force a small tool or attachment to do
the work of a larger industrial tool. Do not use a tool for a purpose for which it was not
intended. Do not use this item for aircraft purposes. Do not exceed winch load
weight capacity for your model (see Specications on page 2).
Dress properly5. . Do not wear loose clothing or jewelry as they can be caught in moving
parts. Protective, electrically nonconductive clothes and nonskid footwear are recom-
mended when working. Wear restrictive hair covering to contain long hair.
Use eye protection6. . Always wear ANSI-approved impact safety goggles. Heavy duty
work gloves need to be worn when handling the cable.
Do not overreach7. . Keep proper footing and balance at all times. Do not reach over or
across running machines. Do not cross over or under cable under load.
Maintain tools with care8. . Keep equipment clean for better and safer performance.
Follow instructions for lubricating and changing accessories. Inspect cords periodically
and, if damaged, have them repaired by an authorized technician. The hook must be
kept clean, dry, and free from oil and grease at all times.
Remove adjusting keys and wrenches9. . Check that keys and adjusting wrenches are
removed from the tool or machine work surface before operating.
Avoid unintentional starting10. . Remove the Switch Ass’y (35) when not in use.
Stay alert11. . Watch what you are doing, use common sense. Do not operate any equip-
ment when you are tired.
Check for damaged parts12. . Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its